PEmicro Cyclone Universal

To Next Page

To Previous Page

13.16 Serial Number Errors.....................................................................................................................................65

13.17 Successful Download Counter Errors ...........................................................................................................65

13.18 System Hardware/Firmware/Logic Recoverable Errors ................................................................................66

Main Page

Introduction6
Quick Start Guide for Sap Operation10
Cyclone Hardware12
Cyclone System Power13
Power Connectors14
Optional Oscillator (MON08 Only)15
PORT A: 10-Pin Keyed Mini Connector (Kinetis, S32 (ARM), Other P&E-Supported ARM Devices)17
PORT B: 20-Pin Keyed Mini Connector (Kinetis, S32 (ARM), Other P&E-Supported ARM Devices)18
PORT C: 14-Pin Debug Connector (Qorivva, SPC5, DSC, S32 (Power))19
PORT D: 26-Pin Debug Connector (Coldfire V2/3/4)20
PORT E: 16-Pin Debug Connector (MON08)21
PORT G: 10-Pin Debug Connector (Power Mpc5Xx/8Xx)22
Ribbon Cable23
Touchscreen Lcd Menu27
Main Menu28
Stand-Alone Programmer Configuration34
Manage Multiple SAP Images42
Stand-Alone Programmer Manual Control44
Home Screen45
Cyclone Battery Pack48
Stand-Alone Programmer Automated Control49
Ethernet Configuration51
Internet Protocol52
Cyclone IP Setup Via LCD Menu53
Cyclone IP Configuration Utility User Interface (Configureip)54
Using Cyclone IP Configuration Utility to Configure the Cyclone57
Serial Port Configuration59
Usb Port Configuration60
Automatic Serial Number Mechanism61
Serialize Utility Example63
Using Serial Number File64
Sap Converter Utility66
Cyclone Error Codes67
SAP Operation Errors68
SAP Verify Range and Module Errors69
Operation Security Related Errors70

PEmicro Cyclone Universal - Page 5

Table of Contents