Cyclone Universal & Cyclone Universal FX - User Manual 1
1 INTRODUCTION
P&E’s Cyclone Universal and Cyclone Universal FX are extremely flexible tools designed for in-
circuit flash programming, debugging, and testing of many ARM microcontrollers (see below for a
list of supported vendors).
Please note: Additional features are planned, particularly for the Cyclone Universal FX.
Please check for updates frequently as this user manual will be revised to document these
features as they are implemented.
The Cyclone Universal and Cyclone Universal FX are designed to withstand the demands of a
production environment. They are Stand-Alone Programmers (SAP) that can be operated
manually or used to host automated programming. In manual SAP mode the Cyclone is operated
using the touchscreen LCD Menu and/or the Start button. Host-controlled SAP mode, for
automated programming, is accomplished using either a command line utility, RS232 protocol,
UDP protocol, or the Cyclone Automated Control DLL.
The Cyclone Universal FX also includes enhanced speed, storage, security, and other features,
which make it an incredibly powerful and versatile solution.
Figure 1-1: Cyclone Universal and Cyclone Universal FX
1.1 Feature Overview
The following table contains an overview of the features of the Cyclone Universal and Cyclone
Universal FX:
To Next Page
Loading...