Pentair AUTOTROL MAGNUM 298 - Time of Backwash; Days Override (762 F Controller Only); Days Between Regeneration (742 F Controller Only); Backwash Length

Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Programming
Ref. MKT-IM-012 / D - 03.02.2022 55 / 110
6.3.4.5 Time of backwash
Set the time of backwash cycle (C1).
1. Press .
ð Backwash time flashes.
2. Adjust displayed time with and .
3. Press to validate the selection and advance to the next
parameter using or .
6.3.4.6 Days override (762F controller only)
Set the number of days for calendar override.
1. Press .
ð Number of days flashes.
2. Adjust displayed number with and .
ð Default time for days override: 0 day (disabled).
ð Days can be adjusted from ½ (0.5) to 99 days.
3. Press to validate the selection and advance to the next
parameter using or .
6.3.4.7 Days between regeneration (742F controller only)
Set the number of days between regeneration.
1. Press .
ð Number of days flashes.
2. Adjust displayed number with and .
ð Set to 0 to program as a 7-day timer.
ð Days can be adjusted from ½ (.5) to 99 days.
3. Press to validate the selection and advance to the next
parameter using or .
6.3.4.8 Backwash length
Set the backwash length in minutes.
1. Press .
ð Time flashes.
2. Adjust displayed time with and .
3. Press to validate the selection and advance to the next
parameter using or .