Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Maintenance
74 / 110 Ref. MKT-IM-012 / D - 03.02.2022
9.5 Recommendations
9.5.1 Use original spare parts
Caution - material
Risk of damage due to use of non-genuine spare parts!
To ensure correct operation and safety of the device, only use original spare parts and
accessories recommended by the manufacturer.
Usage of non-genuine spare parts voids all warranties.
Parts to keep in stock for potential replacements are motor and optical sensor, controller,
transformer, injectors, flapper kit, O-ring kit, refill flow controller and DLFC.
9.5.2 Use original approved lubricants
• Production:
p/n 1014082 (NFO “Chemplex” 862 Silicone Comp.);
• spare part:
p/n 42561 (SILICONE LUBRICANT PACK).
9.5.3 Maintenance instructions
• Disinfect and clean the system at least once a year or if the treated water has an off-taste or
an unusual odor;
• perform a hardness test every year of both inlet and treated water.
To Next Page
Loading...
