20 • FLECK 2815 Control Valve Service Manual
1-1/2 INCH STAINLESS STEEL METER ASSEMBLY
Item No. QTY Part No. Description
1.................1 ........ 62049-01 ............Kit, 1” & 1-1/2” Meter, Std
1 ........ 62049-02 ............ Kit, 1” & 1-1/2” Meter,
Ext
2.................1 ........ 61933-10 ............Meter Assy, 1-1/2” NPT, Std, SS
Inline, Paddle, Univ Cap
1 ........ 61933-11 ............ Meter Assy, 1-1/2” NPT, Ext, SS
Inline, Paddle, Univ Cap
1 ........ 61933-20 ............ Meter Assy, 1-1/2” INLN, BSP,
SS, PDL
1 ........ 61933-21 ............ Meter Assy, 1-1/2” INLN, BSP,
EXT, SS, PDL
3.................1 ........ 44024 .................Fitting, Union, 1.5”, NPT
1 ........ 44025 .................Fitting, Union, 1.5”, BSP
4.................1 ........ 19791-02 ............Meter Cable Assy, 30”
......... 19791-04 ............Meter Cable Assy, Turbine 100”
......... 19791-05 ............Meter Cable Assy, Turbine 304”
5.................1 ........ 17744 .................Meter Cable, 20.75” 1-1/2” STD
Not Shown (optional)
1 ........ 62072 .................Kit, Meter Sleeve, 1-1/2” to 1”
For valves equipped with electromechanical
timers and stainless steel meters, refer to the Meter Dome
and Union Orientation section on page 5.
1
3
2
4
5
Use thread sealant intended for use with
stainless steel connections and approved for use with potable
water. To reduce the risk of seizing or galling, a nickel
impregnated PTFE (polytetrafluoroethylene) thread sealing
tape is recommended.