Pentair FLECK 5800 SXT - Diagnostic mode; Operation; XTRI & XTR controller; Pairing the FLECK 5800 XTRI Connected Valve with Wi-Fi Devices

User Guide Fleck 5800-XTRi-XTR-SXT-LXT
Ref. MKT-UG-054 / A - 03.06.2022 11 / 76
EN
4.3.2. Diagnostic mode
To access the recorded informations, press MODE and simultaneously for 5 seconds. Press to see the data. Press
MODE twice to see the next diagnostic. Press to exit the diagnostic mode.
5 . Operation
5.1. XTRi & XTR controller
5.1.1. Recommendations
• Use only regenerate salts designed for water softening EN973;
• for optimal system operation, the use of clean salt free from impurities is recommended (for example salt pellets);
• do not use ice melt, block, or rock salts;
• the sanitizing process (both with liquid and electrochlorination) introduces chlorine elements which may reduce the lifetime
of the ion exchange resins. Refer to the technical guides for resins in common use, providing necessary checks on the
system.
5.1.2. Manual immediate regeneration
Press to move to the regeneration screen.
Press
now to begin a regeneration immediately, or press at regen. time to
queue the regeneration for the programmed regeneration time. Pressing
at
regen. time
again will cancel the manual regeneration.
During regeneration, press to immediately advance to the next cycle step.
Once in regeneration, the volume or time will be displayed below .
5.2. Pairing the FLECK 5800 XTRi Connected Valve with Wi-Fi Devices
The FLECK 5800 XTRi Connected Valve can be paired with a smartphone or tablet.
New users can download and install the Pentair Home App from the
or .
5.3. SXT controller
5.3.1. Recommendations
• Use only regenerate salts designed for water softening EN973;
• for optimal system operation, the use of clean salt free from impurities is recommended (for example salt pellets);
• do not use ice melt, block, or rock salts;
• the sanitizing process (both with liquid and electrochlorination) introduces chlorine elements which may reduce the lifetime
of the ion exchange resins. Refer to the technical guides for resins in common use, providing necessary checks on the
system.
5.3.2. Manual immediate regeneration
A Press and hold for 5 seconds.
Regeneration
now
at regen. time
Fleck_5800-XTR2_UG_VV_Multilingual.book Page 11 Mardi, 12. juillet 2022 10:34 10