Pentair Fleck7000SXT - MASTER PROGRAMMING MODE CHART

FLECK 7000SXT Service Manual • 7
MASTER PROGRAMMING MODE CHART
CAUTION
Before entering Master Programming, please
contact your local professional water dealer.
Master Programming Options
Abbreviation Parameter Option
Abbreviation
Options
DF Display Format
GAL Gallons
Ltr Liters
VT Valve Type
dF2b Softener Double Backwash
Fltr Filter
dFFF Downflow Fill First. Fixed/Variable
AIO Air Injected Oxidizer
CT Control Type
Fd Meter Delayed
FI Meter Immediate
tc Time Clock
dAY Day of Week, Time Clock
fdPb Flow Delayed Proportional brining
C Unit Capacity Unit Capacity (Grains)
H Hardness Grains of Hardness
RS Reserve Selection
SF
rc
cr
SF Safety Factor % Percentage off of gallon remaining capacity
RC Fixed Reserve Capacity Fixed Gallon Amount
CR Variable Reserve Changes the reserve based on previous day’s water usage.
DO Day Override Day Override Setting
RT Regen Time Time of regeneration for day override or delayed control types.
B1, BD, B2, RR, BF Regen Cycle Step Times Setting time of regeneration cycle steps
CD Current Day
Setting the day of the week you want regeneration to occur. Only shown
with day of week setting in control type
FM Flow Meter Size
t1.2
Generic
K Meter Pulse Setting
Generic
Pulses per gallon setting for generic meters
NOTE: Some items may not be shown depending on timer
configuration. The timer will discard any changes and
exit Master Programming Mode if any button is not
pressed for sixty seconds.