INTELLIBRITE
®
5G Pool and Spa Lights Installation and User’s Guide
5. Install the IntelliBrite
®
Light assembly into the niche and tighten the special
bronze pilot screw.
Use only the special pilot screw provided with this
underwater light. This screw mounts and electrically grounds the housing
securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or
serious injury to pool users, installers or others due to electrical shock.
6. Fill the pool until the underwater light is completely submerged in water
before operating the light.
7. Final check for proper light operation: To check for proper operation,
switch on the main switch or circuit breaker, and the switch that operates the
IntelliBrite underwater light itself. The light should illuminate when power is
applied. If not recheck the installation steps starting with Step 1 (page 7)
FOR INTELLIBRITE POOL AND SPA LIGHT REMOVAL AND
INSTALLATION INSTRUCTIONS SEE:
• Replacing the IntelliBrite
®
5G Pool and Spa Light
Assembly instructions, on page 3.
• Replacing the IntelliBrite Spa Light Face Ring and
Gasket or Gasket and Lens instructions, on page 19.
Pilot screw (bronze)
IntelliBrite 5G Spa Light
Pilot screw (bronze)
IntelliBrite 5G Pool Light
8
To Next Page
Loading...
Need help?
General
