To Next Page

To Previous Page

EQUIPMENT INSTALLATION 19

Rev E

Figure 11

Regenerant Connection for

Performa Valve

An aircheck must be used in the regenerant line when installing a Performa

valve.

NOTE: When installing a 3-cycle filter (253 or 263 valve) use a cap on the

regenerant line connection to prevent water seepage from the port. See

Parts and Accessories section for part number.

Regenerant Line Connection

NOTE: Be sure to use plumbing connection

tube when attaching regenerant line

connections to the Performa valve.

Pentair Logix 700 Series User Manual

Questions and Answers: