Pentair MAGICSTREAM LAMINAR - Laminar Unit Installation and Plumbing Connection

MAGICSTREAM
®
Laminar Installation and User’s Guide MAGICSTREAM
®
Laminar Installation and User’s Guide
23
MAGICSTREAM
®
LAMINAR SETUP AND OPERATION
This section describes how to set up and operate the MagicStream
®
Laminar.
Once the deck is finished, flush any debris from the supply pipe using the
pump and filter system that supplies the laminar.
Note: Any debris in the laminar will hinder its ability to produce a
turbulence-free stream.
Laminar Setup
Make sure the supply piping has been flushed clear as directed above.
1. Carefully spread the brackets and slide the laminar unit into the holes in the
brackets (Figure 3), making sure the Laminar orifice is pointed out the top
slot in the deck housing lid (Figure 4).
Brackets
O-ring
Laminar
adj ustment
nut
Union
winteriz ation plug
Laminar
unit
Laminar orifice
Deck housing lid
Slot
Path of stream
Make sure the laminar
orifice points out the slot in
the deck housing deck lid.
Figure 3. Figure 4.