Pentair NRG-Temp - Temperature Settings; Operation Modes

28
C. Set the desired comfort temperature and reduced
temperature
Set comfort
temperature
Adjust the set temperature value
(desired floor or room temperature)
with the <
> buttons. Confirm
by pressing <
>.
Press <
> again to show the clock
value instead of the temperature set
value.
Return to AUTO mode where
the thermostat will then operate
according to the selected program.
Set reduced
temperature
Adjust the set temperature value
(desired floor or room temperature)
with the <
> buttons. Confirm
by pressing <
>.
Press <
> again to show the clock
value instead of the temperature set
value.
Return to AUTO mode where
the thermostat will then operate
according to the selected program.
D. Select thermostat mode for normal operation
< , , >
Use the < > buttons to scroll through the menu:
Timer
program
mode
Operation of the selected timer program (see
above) with comfort temperature (
) and
reduced temperature (
). For temporary
override of the temperature in the selected
program, adjust the temperature value (desired
floor or room temperature) with the <
>
buttons. Confirm by pressing <
>. The
override will operate until the next programmed
event when the unit will then resume the
automatic program. Press <
> again to
change the view from the clock value to the
temperature view.