23
5.3.4 Menu 4: Display backlight "on" duration
Setting of the display backlight.
Change the time with <
> buttons.
Confirm with <
>. Possible values:
from 0 [OFF] to 120 seconds [120’’] Factory value: 30s
5.3.5 Menu 5: "First warming" function
This function can be used for gradual warming of new
screed.
Possible values: [OFF] or [ON]
This function does not apply by default (Installer menu
number 4: OFF by default, factory value = OFF).
Progressive warming cement slab during 21 days
period, but limited to 20°C.
Working description:
To activate this option the user enters the
installer menu number 4 and selects the
configuration (‘on’ or ‘off’) then presses ok.
When the thermostat comes back to the normal
mode, the user sees instead of the temperature,
the remaining number of days of the progressive
warming (total duration: 21 days).
During this time, the thermostat warming cycle is
equal to 24 minutes (60 cycles per day).
The first day, the thermostat powers
the floor heating system during 1
minute on each 24 min cycle (= 1h of
warming the first day).
The second day, the thermostat powers
the floor heating system during 2
minutes on each 24 min cycle (= 2h of
warming the second day).
Function
remains active
for 21 days.
Function
remains active
for 1 day.
To Next Page
Loading...
