29
Comfort mode Manual continuous operation of the
comfort temperature (no program active)
Reduced mode
Manual continuous operation of the
reduced temperature (no program active)
e.g. holiday period.
6.2. Optional functions
6.2.1 Activating boost function
< >
This function is used for temporarily increasing the
floor or room temperature by 5°C.
Activate booster
Use <
> to select the < >
Press OK to activate.
Terminate
booster mode
Leave unit, as boost function ends
automatically after 2 hours
Or exit <
> mode and go to another
mode by using <
>
6.2.2 Lock
Lock and unlock the thermostat
It is possible to lock all the parameters of the
thermostat. (e.g. public buildings)
Lock: Press and hold all buttons simultaneously.
Unlock: Press and hold all buttons simultaneously.
6.2.3. Configuration menu
Normal Menu:
In both floor and room sensing mode, the temperature
seen on the thermostat corresponds to the set
temperature.
Viewing rules in each regulation mode (Comfort,
Auto, Reduce and OFF-mode)
By default the view configuration is the set
temperature view.
Pressing the <
> button changes the view to actual
temperature value for a duration of 3 seconds.
Pressing <
> again or left keys changes the view
to setting change.
To Next Page
Loading...
