Pentair OMNIFILTER U25 User Manual

• 3 •
• Install filter after water meter or pressure tank.
• Before installing the filter, determine where the unit will be located and
what type of pipe the unit will connect to. The filter head has 3/4-inch NPT
threaded connections molded into it. The distance from the top of the
water piping to the floor must be at least 15-inches for filter change
allowance. Allow a 1-1/2 inch clearance below the housing to allow for
changing the cartridge.
WARNING

Pentair OMNIFILTER U25 Specifications

General

Brand	Pentair
Model	OMNIFILTER U25
Category	Water Filtration Systems
Language	English