Pentair Performa 263 - Description and Components Location; Basic Programming

User Guide Performa 263-268 / LOGIX 740-760
6 / 36 Ref. MKT-UG-011 / C - 25.10.2019
3.3. Description and components location
3.4. Bypassing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
4 . Programming
Note: 
After 30 seconds without a button press, the unit returns to normal operation.
4.1. Basic programming
Note: 
Menus are displayed in a defined and incremental order.
Time setting and winter time - summer time change
Day of week
A Press when the time of the day is displayed.
→ Time flashes.
B Adjust displayed time with and .
C Press to validate the selection and advance to the next parameter.
D Press .
→ Arrow flashes.
E Select displayed day with and .
F Press to validate the selection and advance to the next parameter.
Controller
Outlet
Inlet
Drain
Manual REGEN button
UP button
SET button
DOWN button
LCD display
DLFC
Injector screen
Injector and cap
BLFC
Normal operation
In Bypass
In InOut Out
Valve
Valve
Water conditioner
Water conditioner