Pentair VFD-4000 - Specification; Model and Ratings Overview; Control System and Features; Basic Information

04 I VFD-4000
VFD-4000 I 05
Model
0075 015 022 037 055 075 110 150 185
Insulation Class
IP 55
Max. Applicable
Motor Ouptut
KW
0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5
HP
1 2 3 5 7.5 10 15 20 25
Rated Oupt Capacity (KVA)
1.9 3.0 4.5 6.1 9.9 11.2 18 24 29
Reted Output Voltage (V)
3-phase, 345-440V, 50 / 60Hz
Reted Output Current (A)
1.6 3.2 5 8.2 13 18 24 32 38
Rated Input AC Voltage
3-Phase (3 Wires) 345~440V, 50/60Hz (±5%)
Control System
SPWM (Sinusoidal Pulse Width Modulation, carrier frequency 2-10kHz)
Output Frequency Resolution
0,01Hz
Output Frequency Range
0~120Hz
Torque Characteristics
V/F Control (Regular Torque, Low Deceleration Torque)
Overload Endurance
120% of rated current for 1 minute
Accel / Decel Time
0.1~60 seconds
(Independent settings for Accelerate Time / Decelerate Time)
Input Signals
INP1, INP2 (Multi-function Input)
Alarm Output Contacts
Inverter Status (Multi-function Output)
Pressure Detection Range
0.1~45BAR
Analog Input Signal
PRESS-SEN (4~20mA Pressure Transmitter)
Protections
Over-Current, Over Voltage, Under Voltage, Overheating, Overload,
Low Pressure, High Pressure, Dry run
Other Functions
PID Control, Auto Restart, Alarm Auto Reset, RS-485 Communication
Temperature
-10~40
Vibration
Under 20Hz 9.80665m/s2 (1G)
Cooling Methods
Heat Sink / Fan
Basic
Specification
Nameplate Information
Take the VFD-4000 carefully out of the box.
Check if the ratings shown on the nameplate corresponds to what you have ordered. If
the ratings on the nameplate is diefferent, please contact your local distributor/provider.
Also, check for any damages that may have occur to the VFD-4000 during delivery.
Model Name
VFD-4000
VFD-4000
Serial Number
Input Voltage
Output Voltage
IP Rating
Power Rating
Frame
Weight
Frequency Range
Temperature
Current