How to fix Pentax EPK-i Media Converter that cannot turn on?
If you are unable to turn on the processor of your Pentax Media Converter, ensure the power cord is securely connected to both the power input socket and the isolation transformer. If the issue persists, check the fuses and replace them if necessary.
What does 'PUSH LAMP SWITCH! AUX LAMP is ON' mean on Pentax EPK-i?
If your Pentax Media Converter displays 'PUSH LAMP SWITCH! AUX LAMP is ON', press J on the operation panel to turn on the lamp.
What does 'No VCU Connection' mean on Pentax EPK-i?
If your Pentax Media Converter shows 'No VCU Connection', it indicates that no Endonet is connected. Ensure Endonet is properly connected.
What does 'No Response from VCU' mean on Pentax EPK-i Media Converter?
If your Pentax Media Converter displays 'No Response from VCU', it means that communication with Endonet is abnormal. Ensure that Endonet is properly connected.
General| Brand | Pentax |
|---|---|
| Model | EPK-i |
| Category | Media Converter |
| Language | English |
Mandates disconnecting the power cable before opening the unit to ensure electrical safety.
Details essential post-repair electrical safety tests including dielectric strength and leakage current.
Details the procedure and conditions for performing the dielectric strength test on EPK-i components.
Explains how to measure protective earthing circuit resistance and its acceptable limit values.
Outlines the procedure for measuring leakage current under various test conditions and criteria.
To Next Page
