29
2
Getting Started
Inserting/Removing the SD Memory
Card
Captured images are recorded on the SD Memory Card. Make sure the
camera is turned off before inserting or removing the SD Memory Card
(market product).
1
Slide the card cover in the
direction of the arrow (1) and
then lift open (2).
2
Insert the card all the way with
the SD Memory Card label
toward the LCD monitor.
Push the SD Memory Card in once to
remove.
3
Close the card cover (1) and
then slide it in the direction of
the arrow (2).
• Do not remove the SD Memory Card while card access lamp is lit.
• Format new SD Memory Card. Also format SD Memory Card used with other
cameras. Refer to “Formatting the SD Memory Card” (p.165) for details on
formatting.
Be sure to fully close the card cover. The
camera will not turn on if the card cover
is open.
2
1
2
1
To Next Page
Loading...
Need help?
General
