62
3
Basic Operations
3
Press the four-way controller
(m).
The Drive Mode options screen
appears.
4
Use the four-way controller
(op) to select h or i.
The self-timer lamp will blink to let you
know that the camera is in remote
control wait status.
5
Press the 4 button.
The camera returns to the Fn menu screen.
6
Press the { button.
The camera is ready to take pictures.
7
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when the subject is in focus.
• You cannot focus with the remote control unit in default settings. Focus on
the subject first before operating with the remote control. You can set [AF in
remote control] to [On] in the custom function. (p.103)
• When using the remote control unit, flash does not pop up automatically even
when set to g (Auto discharge). Pop up the flash manually beforehand.
(p.53)
OK
OK
To Next Page
Loading...
Need help?
General
