Pentax Optio 60 - Setting the Date and Time

EN-21
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to
and turn your camera on by pressing
the
button.
 The [Set-up1] menu is displayed.
2. Use  to select [Date Adjust], then press the
button.
 You may press  or  to switch the date types.
3. Press  or  to select Year, Month, Day and Time fields.
 To increase a value, press .
 To decrease a value, press  .
 The time is displayed in 24-hours format.
4. Press the
button after all fields are set.
Set-up2 Set-up3Set-up1
Language
OK :
Sound
Date Adjust
Format
English
Off
d/m/y
3 / 4
Date Adjust
0 1 / 0 7 / 2 0 0 5
0 4 : 0 0
OK :
Select :
 The date illustration shown is for the purpose of explanation and may differ from the actual setting of your camera.