EN-56
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing
the
button.
2. Press to select the [Set-up2] menu, then use to select [USB
Con.].
3. Press the button.
4. Use to select [PC], then press the
button.
5. Turn off your camera.
6. Connect your camera and the computer via a supplied USB
cable.
7. Turn your camera on by pressing the button.
8. There will be a new “Removable Disk” icon detected in “My
Computer”, which contains your recorded images or movie clips.
(For Mac users, double-click [untitled] or [unlabeled] disk drive
icon on our desktop.)
PC
OK :
PC/AV terminal
DC IN 3.0V
Set-up1
Set-up3
Set-up2
Auto Power Off
OK :
USB Con.
PC
To Next Page
Loading...
