EN-36
Auto Bracket
In this mode, the camera automatically changes the exposure within a set range to take three shots after
you press the shutter button once. Auto Bracket settings can be combined with exposure compensation
settings to extend the adjustment range.
1. Rotate the mode dial to
, , , , or and turn your
camera on by pressing the
button.
2. Press the MENU button, then use to select the [Mode2] menu.
In the
mode, press the MENU button.
3. Use to select [Drive Mode], then press the
button.
4. Use or to select [Auto Bracket], then press the
button.
5. To exit the menu, press the MENU button.
The
indicator is displayed on the monitor screen.
6. Press the shutter button to capture the three images.
OK : Exit :
Auto Bracket
In Auto Bracket mode, the flash mode will be set to OFF automatically.
To Next Page
Loading...
