Pentax Optio 60 - Setting White Balance

EN-31
Setting White Balance
This feature lets you make adjustments to compensate for different lighting types according to your
shooting conditions.
1. Rotate the mode dial to
, , , or .
2. Press the
button to turn on the power.
3. Press the MENU button.
4. Use  to select [White Balance], then press the
button.
5. Use  or  to select the desired setting, then press the
button to confirm.
6. To exit the menu, press the MENU button.
OK : Exit :
Mode1 Mode2 Mode3
White Balance
Sensitivity Auto
3 / 4
Recorded pixels
Quality Level
6M
Auto
OK : Exit :
White Balance
Auto
Daylight
Cloudy
1 / 5
Tungsten Light
OK : Exit :
White Balance
5 / 5
Fluorescent Light