Pentax Optio 60 - Page 49

EN-49
Use  or  to select by your preference, then press the button.
[Copies]: Allows you to select image quantity (0~10). Use  or  to
set the image quantity.
[Date]: The date of recording can be printed directly on the images.
Select [OK] or [Cancel] with  or  .
[Return]: To exit the mark function, use  or  to select [Return],
then press the
button.
Press the MENU button to return to the image playback mode.
* The
is marked on the displayed image.
To unmark the
mark, go back to step 3 to select [Reset All] with  or .
4
5
Step Figure Procedure
 Before you perform the DPOF settings on your camera, always remember to copy your images from the internal
memory to an SD memory card first.
 The print icon will appear on the monitor indicating images selected for printing.
 You cannot print movies.
OK : Exit :
Single Image
Copies
Date
Return
2
OK
2/3
OK : Exit :
Single Image
Copies
Date
Return
2
Cancel
1/3
OK : Return :
DPOF
Single image
All Images
Reset All