122
6
Playback/Deleting/Editing
When the AV cable is connected to the camera, the image can be
displayed using the remote control unit E or F (optional).
1 Press the Q Playback button.
2 Press the Shutter button or the zoom button of the
remote control unit.
Shutter button: displays the next image.
Zoom button: displays the previous image.
• If you intend to use the camera for a long time, use of the AC
adapter kit K-AC42 (optional) is recommended. Refer to the
operating manual for the TV or equipment to which the camera is
connected.
• Images may not be displayed properly depending on the countries
or areas when the Video Out setting is the default. In this situation,
change the Video Out setting.
• While the camera is connected to the TV, the LCD monitor of the
camera will be turned off.
Playing Back an Image Using the Remote Control
Unit (optional)
• As there is no zoom button on the remote control unit F, only an
operation using the shutter button (displaying the next image) is
available.
• You cannot play back movies, images with a voice memo, and
sound files recorded in Voice Recording mode, using the remote
control unit.
To Next Page
Loading...
Need help?
General
