15
Getting Started
1
Use the battery charging stand D-BC42 supplied with the camera to
charge the battery before using the camera for the first time or when the
[Battery depleted] message appears. You can charge the battery without
removing it from the camera.
1 Connect the AC plug cord to the battery charging stand
D-BC42.
2 Plug the AC plug cord into the power outlet.
3 Turn the camera off.
4 Place the camera in the battery charging stand.
Position the camera so that the lens rests in the depression in the
case. The CAMERA charging indicator on the stand lights red while
the battery is being charged and goes out when charging is completed.
5 Remove the camera from the battery charging stand
when charging is completed.
Charging the Battery
Charging the Battery in the Camera
To power outlet
CAMERA charging indicator
AC plug cord
1
2
4
Battery charging
stand D-BC42
To Next Page
Loading...
Need help?
General
