20
Getting Started
1
If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter kit K-AC42 (optional) is
recommended.
1 Make sure that the camera is turned off and open the DC
input terminal cover.
2 Connect the DC terminal on the AC adapter to the DC
input terminal on the camera, being sure to match the
4 symbols.
3 Connect the AC plug cord to the AC adapter.
4 Plug the AC plug cord into the power outlet.
Using the AC Adapter (optional)
• Make sure that the camera is turned off when connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and connecting cable are
inserted securely. The data may be lost if the cable becomes
disconnected while you are taking pictures.
• Be sure to read the operating manual accompanying the AC
adapter before using the adapter.
•
Be sure to match the
4
symbols when connecting the DC terminals.
Inserting the plugs with too much force may damage them.
3
2
1
To power outlet
4
4 symbols
AC plug cord
To Next Page
Loading...
Need help?
General
