91
Taking Pictures
4
To use the shake reduction function for still pictures (p.52), you need to
set [Shake Reduction] to On in the [
A Rec. Mode] menu.
1 Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to
select [Shake Reduction].
3 Use the four-way controller (45) to
select O (On)/P (Off).
On: (Shake Reduction On) is displayed
on the capture screen.
Off: (Shake Reduction Off) is displayed on the capture screen.
4 Press the shutter release button halfway.
The camera is ready to take the picture.
Setting the Shake Reduction for Still Pictures
You can also select O (On)/P (Off) using the Green button. This
function cannot be used when assigning a function other than Shake
Reduction to the Green button. (1p.93)
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
Auto
8M
MENU
Shutter release
button
MENU button
Four-way
controller
Rec. Mode
MENU
Exit
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
1sec1sec
±0.0
Shake Reduction
To Next Page
Loading...
