To Next Page

To Previous Page

126

Playback/Deleting/Editing

Direct Printing Using PictBridge

By connecting the camera to a printer that supports PictBridge using the

USB cable (I-USB17) supplied with the camera, you can print images

directly from the camera without using a PC. Select the images you want

to print and the number of copies on the camera after it has been

connected to the printer.

Select [PictBridge] for [USB Connection] on the

[

Set-up] menu.

1“Changing the USB Connection Mode” (p.159)

2 Connect the camera to the printer

using the USB cable supplied with

the camera.

The PictBridge menu appears.

• You are recommended to use the AC adapter kit K-AC42 (optional)

while the camera is connected to the printer. The printer may not

work properly or the image data may be damaged if the battery runs

out of power while the camera is connected to the printer.

• The access lamp blinks slowly while data is being transferred from

the camera to the printer.

• Do not disconnect the USB cable during data transfer.

• Depending on the type of printer, not all the settings made on the

camera (such as DPOF settings) may be valid.

Connecting the Camera to the Printer

DPOF setting

Print All

Select printing mode

DPOF setting

Print One

Print All

Select printing mode

Pentax Optio A10 User Manual

Other manuals for Pentax Optio A10