Pentax Optio A20 - (Setting the Display Language and the Date and Time); Initial Settings; Setting the Display Language

26
1
Getting Started
Initial Settings (Setting the Display
Language and the Date and Time)
If the Initial Setting screen or Date Adjust screen appears when you turn
the camera on, follow the procedure below to set the display language
and/or current date and time.
If the Initial Setting screen appears:
1p.26 - 27 “Setting the Display Language”, “Setting the
Date and Time”
If the Date Adjust screen appears:
1p.27 - 28 “Setting the Date and Time”
You can select the language in which the menus, error messages, etc.
are displayed from the following: [English], [French], [German],
[Spanish], [Portuguese], [Italian], [Swedish], [Dutch], [Russian], [Thai],
[Korean], [Chinese (traditional and simplified)] and [Japanese].
1 Press the four-way controller (5).
The Language/ screen appears.
2 Use the four-way controller
(2345) to select a language.
The default setting is English.
If you want to change the initial settings, refer to “Changing the Date
and Time” (p.162) and “Changing the Display Language” (p.166).
Setting the Display Language
Power switch
Four-way controller
OK button
Initial Setting
OKMENU
OKCancel
English
Hometown
New York
Video Out
DST
OFF
0:00
NTSC