102
Taking Pictures
4
Set [Shake Reduction] in [A Rec.Mode] menu to [O (On)] to use the
Shake Reduction function for still images. For details on the function, see
p.54.
1 Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23)
to select [Shake Reduction].
3 Use the four-way controller (45)
to select [O (On)/P (Off)].
O (On) : (Shake Reduction On)
appears on the LCD monitor when
you press the shutter release
button halfway.
P (Off) : (Shake Reduction Off) is always displayed on the LCD
monitor.
4 Press the shutter release button halfway.
The camera is ready for taking pictures.
Setting the Shake Reduction Function for Still
Images to On
You can also select On/Off using the Green button. This function
cannot be used when assigning a function other than Shake
Reduction to the Green button. (1p.104)
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
10M
AUTO 800
MENU
Shutter release
button
MENU button
Four-way
controller
Rec. Mode
MENU
Exit
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
0.5sec0.5sec
±0.0
Shake Reduction
Downloaded From camera-usermanual.com Pentax Manuals
To Next Page
Loading...
Need help?
General
