74
Taking Pictures
4
You can take pictures with a decorative frame added using the Frame
Composite function. There are three frames already stored in the
camera.
1 Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2 Use the four-way controller
(2345) to select Y
(Frame Composite).
3 Press the OK button.
The frame selection screen appears.
4 Use the four-way controller (45)
to select a frame.
5 Press the OK button.
The subject appears in the selected frame.
6 Press the shutter release button
halfway.
The focus frame on the LCD monitor will
light green when the camera is in focus.
Taking Pictures in Frame Composite mode
Shutter release button
Four-way controller
OK button
Green button
Frame Composite
OKMENU
OK
Cancel
Select the frame
To Next Page
Loading...
Need help?
General
