Camera Settings 42
The Setup Menu
English
Quick View
The Quick View setting allows you to view the photo that you have just
taken. Once you have taken your photo, it displays on the LCD screen. If
you are not satisfied with the result, you can press the button to delete
the photo immediately. Press the OK button to confirm. Select ON (default)
to enable the function or OFF to disable it.
Continuous AF
The Continuous AF setting allows you to turn the continuous auto focus
function ON or OFF. Press the OK button to enter. Select ON to enable the
function or OFF (default) to disable it.
Camera Sound
The Camera Sound setting allows you to adjust the camera sound level.
You can also set the start-up and shutter sound when you turn on the
camera and press the shutter button. Available options are as follows:
• VOLUME: OFF, LOW, NORMAL (default) , HIGH
• START-UP: Sound 1 (default), Sound 2, Sound 3
• SHUTTER: Sound 1 (default), Sound 2, Sound 3
• EXIT: Select to discard the changes and return to the main
menu.
Auto LCD Off
The Auto LCD Off setting allows you to adjust the length of time that the
LCD screen will remain lit before turning off to save battery power. Three
options are available:
•OFF (default)
•30 SEC
•1 MIN
Note:
The Quick View function is not available in Burst and M-Burst modes.
QUICK VIEW
ON
OFF
CONTINUOUS AF
ON
OFF
CAMERA SOUND
LOWVOLUME
START-UP
SHUTTER
EXIT
2
3
AUTO LCD OFF
OFF
30 SEC
1 MIN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
