45 Camera Settings
PictBridge Print (PTP)
English
• EXIT: Cancel format action.
Reset
The Reset setting allows you to reset the camera to the original factory
default settings except date&time, language, and video out format. This
means all modifications you have made to the camera settings will be
cleared.
Once selected, the Reset screen displays a confirmation message. Press the
OK button to enter the selection function, select YES to proceed with the
Reset or EXIT (default) to cancel.
Voice Memo
The Voice Memo setting allows you to record a voice memo when a photo
is taken or in playback mode. Select ON to enable the Voice Memo function
or OFF (default) to disable it.
About
The About screen allows you to check the current firmware version of the
camera.
PictBridge Print (PTP)
The PTP function allows you to print images captured by the camera
directly without connecting the camera to a PC.
If the camera is not connected to a PTP compliant printer, an error message
displays on the LCD screen. To enable PTP function, see “USB Mode” on
page 46 for detailed information. If the USB mode is not set at PTP, an error
message displays on the LCD screen.
RESET
Reset to camera
default setting?
YES
EXIT
VOICE MEMO
ON
OFF
ABOUT
FW VERSION : 1.0000
MENU
Connecting fail!
To Next Page
Loading...
