22
1
Getting Started
Operating the Camera Parts
The following is an explanation of how to operate the camera parts.
Pull the grip out from the camera and rotate it in the direction indicated
by the arrow.
Adjust the grip to a comfortable position for holding the camera (about
120°).
Using the Grip
You can rotate the grip to a maximum of 180 degrees to the lens. Do
not apply excessive force to the grip.
• You can use the camera without extending the grip.
• For greater stability, leave the grip unextended when attaching the
camera to a tripod.
Take hold of the grip near the
hinge and extend it.
Rotate the grip to the
desired position.
about 120°
e_kb353.book Page 22 Monday, May 31, 2004 3:05 PM
To Next Page
Loading...
