Pentax OPTIO MX - Turning the Camera on and off; Playback Only Mode

25
1
Getting Started
Turning the Camera On and Off
1
Press the power switch.
The camera turns on and the power switch
lights green.
The shooting mode icon and name appear
for one second.
If the Initial Settings screen or Date Adjust
screen appears when you turn the camera
on, follow the procedure on page 27 to set
the display language and/or current date and time.
2 Press the power switch again.
The camera turns off and the power switch turns light off.
Use this mode when you want to play back pictures one after another.
Pressing the shutter release button does not change the mode to the
Capture mode.
1 Press the power switch while pressing the Q button.
The camera turns on in Playback Only mode.
Taking Still Pictures 1p.46
Recording and Playback 1p.65
Playback Only Mode
To switch from Playback Only mode to Capture mode, turn the
camera off, then turn it on again.
Playing Back Still Pictures 1p.96
Power switch
OK button
Program
P r o g r a m
Program
e_kb353.book Page 25 Monday, May 31, 2004 3:05 PM