89
4
Taking Pictures
5 Press the shutter release button halfway.
The White Balance setting is saved and the camera returns to capture
status.
Refer to “Manual Setting” below for instructions on adjusting the white
balance manually.
Have a blank sheet of white paper or similar material ready.
1 In the White balance screen, use the four-way controller
(23) to select K (Manual).
2 Point the camera at the blank
sheet of paper or other material so
that it fills the screen of the LCD
monitor.
3 Press the shutter release button
fully.
The white balance is automatically adjusted.
4 Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode]
menu.
5 Press the 3 button.
The camera is ready to take pictures.
If you use the [White Balance] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the White Balance 1p.97
Manual Setting
White Balance
Cancel
Cancel
MENU
Adjust
SHUTTER
To Next Page
Loading...
Need help?
General
