Pentax Program Plus - Page 15

Note: The shutter speed LCD will indicate "1000' until the exposure
counter registers "0”. This fast speed saves time when advancing
film to the first frame. Starting with the first frame on the counter,
the LCD provides proper shutter speed and aperture value according
to the designated exposure mode.
Automatic power cut-off
As an energy-saving measure, a timer switch is integrated into the
exposure meter circuit. It automatically shuts off power
approximately 30 sec. after you take your finger off the shutter
release button.
Low battery warning
When batteries become weak, the viewfinder display warns you by
alternately displaying exposure information and a row of OOO's.
I p ■ vs' 1 1 Fa I ^ I °°°l [ ° ° □
This alternate LCD indication tells you that both batteries should
be replaced promptly to restore the camera to normal functioning.