Pentax Program Plus - Film Wind Lever

FILM WIND LEVER
-Exposure counter
The scale is indexed as follows:
• • 0 ’ 2 • 4. 3 4 . 36, with 0,
20. 34, 36 coded in red. The counter,
which is interlocked with the film
winding mechanism, indicates the
number of exposed frames.
Setting the wind lever for rapid shooting
The film wind lever can be set at the stand-off
position for faster film advance. Even if you
remove your thumb from the lever, it remains at
the stand-off angle, ready for the next quick shot.
After completing a series of pictures, the lever
should be pushed in to the original position.
Film advance stroke
The film wind lever should be thrown as far as it
goes.
Note: The wind lever may stop in the middle of
a stroke when the film comes to its end. Do not
force the lever, but rewind the film, leaving the
lever as it is.
• 16