Pentax Program Plus - Using Screw-Mount Takumar Lenses

USING SCREW-MOUNT TAKUMAR LENSES
Conventional screw-mount lenses can be easily
attached to the lens mount of your camera by
using the optional Mount Adaptor K. But there
are some limitations.
• Put the Mount Adaptor K in the body mount by
matching both marks.
• To lock it, rotate the adaptor clockwise (65®)
with a pointed object such as a ball-point pen.
Now your camera can accept any conventional
Pentax screw-mount lenses.
• To remove the adaptor, press the spring pin on
the adaptor with some pointed aid and rotate it
counterclockwise until it stops.
Limitations in using screw-mount lenses on
this camera
• The distance scale of the lens is usable as it is,
up to infinity ( }.
• Automatic diaphragm coupling doesn't function
due to the difference In coupling system.
• The exposure is metered with aperture stopped
down.
• Programmed AE mode cannot be used with
screw-mount lenses.
• There is not automatic aperture setting even with
dedicated flash units.