Pentax Program Plus - Strap and Case

STRAP AND CASE
• First strip the clasp and belt ring fronn either end
of the strap.
• Let the strap end go through the neck strap ring
and then the belt ring, and further through neck
strap ring of the cannera. The strap is then folded
back.
• Let the strap end run through the belt ring and
then clasp as illustrated. Now the end is tightly
caught by the clasp. The strap end may be passed
through the inside or outside of the clasp.
• Insert the camera body into the back case and
put both case hooks around the camera's strap
eyelets. The camera body is now held securely in
the case.
• The standard soft case comes complete with
a front cover.
• To remove the front cover, turn the cover a full
180 while pulling it slightly towards you and the
fastener of the cover unlocks.
• 14