Pentax Program Plus User Manual

HOW TO USE VARIOUS ACCESSORIES WITH YOUR CAMERA
• When you attach the following accessories to
this camera, use the stop-down (or working
aperture) metering mode or Metered Manual mode:
Bellows Unit UI
Microscope Adaptor K
Helicoid Extension Tube K
Extension Tube K Set
Reverse Adaptor K 49mm/52mm
6x7 Lens Mount Adaptor K
Telescope Adaptor K
• When you attach the following accessories to
this camera, use the Aperture-priority AE mode
or Metered Manual exposure mode:
Auto Bellows A Set and M Set new
Auto Extension Tube K Set
Auto Extension Tube K 100mm/50mm
Rear Convertor K T6-2X
fjote The scale and double cable release of the
Auto Bellows M Set cannot be used with this
camera.
• Use the Refconverter A because with the
Refconverter M the viewfinder LCD of this camera
is not visible.
• When using the Winder ME II with this camera, be
sure to set the AUTO/125X indicator of the
winder at AUTO. If not set at 1 25X, it may cause
malfunction.
• Do not use the Winder ME with this camera,
as they are not designed to fit it properly.
• The Programmed AE mode does not function
with a Pentax dedicated flash set at "M" (manual)
or "MS" (manual synchronization).
• As you set up for multi-flash photography with
dedicated flash units, use this camera m the
Aperture-priority AE or the Metered Manual
mode.
• 56

Pentax Program Plus Specifications

General

Lens mount	Pentax K mount
ISO range	25 - 1600
Film advance	Manual
Camera type	SLR
Exposure modes	Program, Manual
Metering	TTL, center-weighted
Flash	Hot shoe