Pentax Program Plus - Page 39

Aperture-priority AE mode warnings
If the subject is very bright, you will see a
flickering
\ t 1 < / /
I f o o o 1
As remedy, shift the aperture ring towards smaller
values (or, to the direction of f/22).
If the subject is dark you will see flickering.
Rotate the aperture ring towards the lens
maximum aperture <f/1.4). When the display stops
flickering, you can take a proper exposure. If
flickering continues even after the aperture is
changed, the subject is too dark or too bright for
a normal exposure. For very bright subjects, use
a slower film or an ND filter, and dark subjects,
use a faster film, flash or other artificial lighting.
35*