Pentax Program Plus - Page 41

Warnings for Metered Manual mode
The following indications will be given for over- or
under-exposure.
\ \ > t^
I ^1 1*3 ~| Aperture LCD Flickering
This Indicates over-exposure of more than three
steps. Change to a faster shutter speed (towards
1/1000 sec.), or select a smaller aperture by
rotating the aperture ring toward f/ 22 .
S V > t « / /
1 J?S ~1 1 - 3 I Aperture LCD Flickering
In this case, the exposure is more than three steps
under. Change to a slower shutter speed (towards
15 secs.), or rotate the aperture ring towards f/1.4.
When your shutter/aperture combination comes
within the range of ±3, the flickering stops.
If the situation is beyond the meter coupling range
indications are as follows.
{ ? S o 1 I * 3 1 Both flickering at high
values. The subject is too bright,
_ \ ^ 4 i / N ^4 > 4 < /
I 0 ~| I - 3 I Both flickering at low
values. The subject is too dark.
In either case, the subject is not within the meter
coupling range. So you will not be able to obtain
a proper exposure simply by changing aperture
and shutter speed settings.