Pentax Program Plus User Manual

Film Transport: Single-stroke, rapid wind lever with 135° throw and 30° standoff angle; Accepts Winder
ME II, Motor Drive A.__
Exposure Counter: Additive type, automatic resetting. Automatically sets shutter-speed at 1 /1000 sec.
up to "O' frame on the counter when shutter dial is set at AUTO or M.
Film Rewind: Crank type.
Exposure Metering: Open aperture, Through-The-Lens, center weighted, average area metering system
with GPD cell.
Metering Range: EV 1 {f/1.4 1 sec.) - EV 18 (f/l6, 1/1000 sec. or f/22, 1/500 sec.) with 50mm f/1.4
lens and ISO 100 film.
ISO Range: 6 - 3200. ”
Exposure Compensation Exposure: Compensation dial indexed at 4X,2X, IX, l72X and 1/4X.
Depth-of-Field Preview: Via depth-of-fieldjpreview lever when aperture set manually.
Power Source: Two 1.5V alkaline or silver-oxide batteries, or one 3V lithium battery.
Metering Circuit Main Switch: Switched on by shutter release button and remains on for about 30 sec.,
shut-off by built-in tirn^r. _ _
Battery Warning: When batteries grow weak, LCD alternately flashes exposure designations and 'ooo'
sign. When batteries exhausted, LCDs go blank and shutter locks.
Back Cover: Standard camera back with spring catch, built-in memo holder/grip, fully interchangeable
with Dial Data ME and Digital Data M.
Size & Weight: 131 mm x 87mm x 47.5mm, 490g (body only, without batteries)
131 mm X 87mm x 84.5mm, 725g (with f/1.4 lens, without batteries)

Pentax Program Plus Specifications

General

Lens mount	Pentax K mount
ISO range	25 - 1600
Film advance	Manual
Camera type	SLR
Exposure modes	Program, Manual
Metering	TTL, center-weighted
Flash	Hot shoe