103
3
Taking Pictures
3
Press the 4 button.
The camera enters the X mode.
Turn the camera 90° clockwise and align
your first picture.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.71).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button
fully.
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image. Repeat steps 4 and 5 to take the second
image. This combines first and second images.
The stitched first and second image appears on the display temporarily
(Instant Review), and then is saved.
1
38
2
OK
Exit
To Next Page
Loading...
