Pentax WG-10 - Monitor Indications; Display in A Mode

23
The display changes in the following sequence each time you press the
4/W button: “Normal Display”, “Histogram + Info”, “No Info”,
“LCD Off”.
Monitor Indications
Display in A Mode
• All the camera buttons function as normal even when the LCD is off.
Press the shutter release button to take pictures as normal.
• Y appears if you press the shutter release button halfway when
camera shake is likely to occur. To prevent the camera from shaking,
use a tripod, a remote controller (optional) and/or the self-timer
function (p.94, p.97).
• You cannot turn off the LCD in N (Frame Composite), e (Pet) and
F (Digital Panorama) mode.
• You cannot change the information on the display by pressing the 4/
W button in 9 (Green) mode or X (Digital Wide) mode.
• In (Digital Microscope) mode, the 4/W button only
switches between the Normal display and the No Info display.
AWB
AWB
38
ISO
ISO
200
200
ISO
200 AWB
12
12 M
14 M
38
OK
OK
OK
OK
Histogram + Info
No Info
Normal Display
LCD Off