Pepperl+Fuchs 2-D LiDAR R2000 Series - Interfaces and Connections

2020-05
12
2-D LiDAR Sensor
Product Description
3.6 Interfaces and Connections
The following connections are found on all devices:
Power Supply
There is a 4-pin M12 plug on the rear of the housing for connecting the power
supply. The following diagram shows the pinout:
Figure 3.2 Power supply connection layout
MultiPort
There is an 8-pin M12 plug on the rear of the housing for service purposes.
1 24 V power supply
2 Q2
3 Ground (GND)
4 Q1
1
3
4
2
1
4
6
7
8
53
2