c
6000 Series Purge/Pressurization System
I/O Manual
Contents
1. Safety 1
1.1 Introduction 1
1.1.1 Contents 1
1.1.2 Target group, personnel 1
1.1.3 Symbols used 2
1.1.4 Pertinent laws, standards, directives, and further documentation 2
1.1.5 Declaration of conformity 2
1.1.6 Markings / Certifications 3
1.1.7 Responsibility of the operator and/or installer 4
1.1.8 General information on the ignition protection class – purging/pressurization system 4
1.1.9 Conditions of safe use 5
2. The 6500 purge and pressurization system – general explanation of the system 6
2.1 Standard vs. dilution applications 6
2.2 The 6500 system 7
2.3 6500 control unit 9
2.4 Technical specifications 10
2.5 Electrical connections 14
2.6 Dimensions 16
2.7 Mounting of the control unit – external, internal, internal with remote UIC mounting 20
3. EPV-6500 pressure relief vent 23
3.1 Introduction 23
3.2 Technical specifications 24
3.3 Electrical connections 26
3.4 Dimensions 27
3.5 Flow rate curves 28
3.6 Mounting of the EPV-6500 vent – Inside and outside 30
4. Manifold valves 31
4.1 6500-MAN-DV 31
4.2 6500-MAN-PV 31
5. Cable glands 6500-CBLG-... 32
6. Sequence of events 33
6.1 Turning on enclosure power 33
6.2 Turning off enclosure power 34
To Next Page
Loading...
