Pepperl+Fuchs 6000 SERIES - Page 52

6500 Series Purge and Pressurization System
I/O Manual
48
FUNCTION ACTION
DISABLED Nothing happens
IMMEDIATE SHUTDOWN AUX contacts energize when there is an immediate shutdown active
OVERLOAD AUX contacts energize when there is an overload condition
MAX PRESSURE ALARM AUX contacts energize when the maximum pressure set point is
reached
LOW PRESSURE ALARM AUX contacts energize when the enclosure pressure drops below low
pressure set point
LOST PRESSURE ALARM AUX contacts energize when the enclosure pressure drops below lost
pressure set point
ANNOUNCE PURGE AUX contacts energize when the system is purging
ANY ALARM AUX contacts energize when any alarm is active. The STATS menu
will indicate the alarm
ENCLOSURE DOOR LOCK Aux contacts energize and will de-energize after the enclosure unlock
timer has counted down
SYSTEM BYPASS ALARM AUX contacts energize when the bypass is active
TEMP INPUT 1 ALARM AUX contacts energize when temperature input 1 alarm is active
TEMP INPUT 2 ALARM AUX contacts energize when temperature input 2 alarm is active
INVERT OUTPUT? - When selection is NO, the output is active when the function is active. When selection
is YES, the output is active when the function is not active.
Selection: YES or NO
Default: NO
• Passwords
During the first power up of the 6500 control unit, the setup and bypass passwords are entered in by the
user. These passwords can be changed at any time. The passwords are key strokes from the up, down,
right, and left keys on the user-interface. The identical consecutive key strokes are not allowed. The setup
and bypass password can be the same but it is recommended to keep them different.
PASSWORDS  CHANGE SETUP
PSW
 CREATE SETUP
PASSWORD
 VERIFY SETUP
PASSWORD
 CHANGE BYPASS
PSW
 ENTER BYPASS
PASSWORD
 CREATE BYPASS
PASSWORD
 VERIFY BYPASS
PASSWORD
• Language
During the first power up of the 6500 control unit the language is selected and can be changed at any time.
LANGUAGE  ENGLISH  SETTING CORRECT Y/N
 DEUTSCH  SETTING CORRECT Y/N
 ESPAÑOL  SETTING CORRECT Y/N
 FRANCAIS  SETTING CORRECT Y/N